Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
3 Network Settings
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
13
3 Network Settings
3.1 Using the Settings Wizard
The Wizard can help to set the basic parameters, camera parameters, and network parameters
of the terminal quickly and conveniently.
To use the settings Wizard, do the following:
Step 1 From the home screen, select Settings.
Step 2 Choose Installation > Wizard, and then set parameters as required.
For details, see section 3.2 "Setting Basic Parameters", section 3.3.3 "Setting H.323
Parameters", section 3.3.4 "Setting SIP Parameters", and section 4.2.4 "Setting Camera
Output Parameters."
----End
3.2 Setting Basic Parameters
Before using the HUAWEI VP9050, certain basic parameters, such as the site name, system
time, and answering mode of the local site.
To set the terminal's basic parameters, do the following:
Step 1 Choose Settings > General.
Step 2 Select General, and then set the parameters listed in Table 3-1.
Table 3-1 Basic parameters
Parameter Description
Site name
The site name will be superimposed on the local video indicating the
site of the terminal. When the site joins a multipoint conference, the
site name of the terminal is displayed in the conference site list.
Location
This specifies the terminal location. After a location is selected, the
terminal automatically adjusts the time zone to a value that
corresponds to the location.