Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
3 Network Settings
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
18
Parameter Description
Enable proxy server
When the terminal needs to register with the IP multimedia
subsystem (IMS) for deploying services, enable the proxy server
and set its address.
NOTE
Borne by the standard IP protocol, the IMS uses voice over IP (VoIP)
applications based on the standard SIP applications of the 3rd Generation
Partnership Project (3GPP) to provide fixed and mobile multimedia services
for operators.
Proxy server address
The proxy server needs to forward the registration request from the
terminal to the SIP server in the IMS network when the terminal is
registering with the IMS network.
Conference Service
Number
Before initiating a conference from the terminal on an IMS
network, you must set this parameter and ensure that the terminal
setting is consistent with the setting on the IMS network device.
The conference service number can be obtained from the
administrator of the IMS network device.
Site number
This specifies the site number of the local terminal. When the local
terminal is registered with the SIP server, another terminal can call
the local terminal using this site number. The site number can
contain only digits.
User name
Password
The user name is used by the SIP server to identify the local
terminal after the terminal is registered with the SIP server. The
user name and the password can contain only digits and letters.
Step 2 Save the settings.
----End
3.3.5 Setting SNMP Parameters
When the terminal needs to be managed by the MediaManager remotely, the Simple Network
Management Protocol (SNMP) parameters of the terminal must be set.
The terminal communicates with the ViewPoint MediaManager (MediaManager for short),
which is the software for managing network elements over SNMP. Considered as a network
element, the terminal is managed by the MediaManager remotely. Using the MediaManager,
the following operations can be performed on the terminal:
Setting terminal parameters, such as IP parameters, H.323/SIP parameters, E1/4E1
parameters, firewall parameters, network address book parameters, video input
parameters, video output parameters, audio input parameters, and whether to enable Web
access
Importing records to or exporting records from the network address book
Querying terminal status
Querying the terminal alarms
Diagnosing the network faults on the terminal
Restarting or upgrading the terminal