Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
4 Video Settings
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
29
Table 4-3 describes the specifications of the video output interfaces of the terminal. The
display contents vary with the interfaces to which the displays are connected. In the following
table, ① indicates local video; ② indicates local presentation; ③ indicates remote video;
④ indicates remote presentation.
Table 4-3 Specifications of the video output interface
Video Output
Interface
Interface
Type
Output
Format
Video
Displayed
Whether User
Interface Can Be
Displayed
DVI/VGA
OUT
DVI-I
DVI, VGA,
and YPrPb
①②③④
Yes
Use the cable that is provided to connect a display to the terminal based on the content to be
displayed and the interface on the display.
Please use the cables provided along with the terminal. Other cables may not be able to ensure the
desired quality. It is recommended that you contact the device supplier to purchase the relevant cables.
Table 4-4 Interfaces and cables
Interface → Format Required by a
Display
Cable to Be Used
DVI-I interface → DVI format DVI extension cable
DVI-I interface → SXGA/VGA
format
DVI-SXGA cable
DVI-I interface → YPrPb format DVI-YPrPb (component video) cable
4.2.3 Setting Camera Input Parameters
When cameras of certain models are used along with the terminal, the parameters for these
cameras must be set. For details about how to install and operate a camera, see the documents
provided in the camera package.
To set the input parameters of a camera connected to the terminal, do the following:
Step 1 Choose Settings > Video > Video Input.
Step 2 Select DVI/VGA IN.
Step 3 Set the parameters listed in Table 4-5.
Table 4-5 Camera input parameters
Parameter Description
Camera name
This specifies the name of a camera. During a conference, you can
switch between cameras based on their names.