Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
3 Network Settings
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
15
Table 3-2 Status indicators of the LAN interface
Indicator Status Connection Status
The orange indicator is off.
The LAN interface is in 10 M network interface
mode.
The orange indicator is on.
The LAN interface is in 100 M network interface
mode.
The green indicator blinks.
Data is being transmitted. The green indicator turns
off each time a frame of data has been transmitted.
The green indicator is off.
No data is being transmitted or the network is not
reachable.
3.3.2 Setting IP Parameters
The IP parameters of the terminal must be set to allow video communications over an IP
LAN.
To set the terminal's IP parameters, do the following:
Step 1 Choose Settings > Network > IP, and then set the parameters listed in Table 3-3.
Table 3-3 IP parameters
Parameter Description
Connection type
Static IP: The IP address of the terminal is assigned by the network
administrator. If this mode is selected, you must enter the local IP
address, subnet mask, and gateway IP address.
Dynamic IP: The terminal automatically obtains the IP address from
the network. If this mode is selected, you do not need to set other
parameters.
PPPoE: The terminal accesses the broadband network in dial-up
mode, such as the Asymmetric Digital Subscriber Line (ADSL). If
the Point-to-Point Protocol over Ethernet (PPPoE) mode is selected,
you must set the user name and the password.
Local IP address
Subnet mask
These specify the IP address and subnet mask of the terminal.
Alternate IP
address
Alt. subnet mask
The main IP address and the alternate IP address must be in different
network segments. The alternate IP address and the IP address of the
gatekeeper (GK) must be in different network segments.
DNS server
address
If the connection type is set to Static IP, the IP address of the domain
name service (DNS) server is available to be set. After the IP address
of the DNS server is set, domain names can be used for the GK server
address and the SIP server address. The DNS server will translate the
domain name to the IP addresses of the GK server and the SIP server.