Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
6 Conference Initiation
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
48
Parameter Description
Category
This specifies the conferencing scenario of a site. The following
describes different options:
If the site attends conferences hosted using traditional
videoconferencing systems, select Ordinary site.
If the site attends conferences hosted using Huawei telepresence
systems, select Telepresence site.
If the site is a Cisco TelePresence site and attends conferences
held using Huawei videoconferencing systems, select CT site.
Number This specifies the site number used to make calls between sites.
IP, SIP, and H.323 Phone site numbers are allocated by the
videoconferencing service provider.
PSTN site numbers are telephone numbers.
Type
This specifies the line used by the terminal to access the
videoconferencing network.
Rate
This specifies the rate supported by the terminal over the
corresponding access line used by the site.
It is recommended that you select the highest rate.
IP address This specifies the IP address of the site.
Step 3 Select Save.
----End
Creating a Group
If certain sites join a conference regularly, they can be defined as a group.
To create and define a group, do the following:
Step 1 On the Address Book screen, select Create Group to display the Create Group screen.
Step 2 Enter a name for the group in the text box. The name cannot consist of only digits.
Step 3 Select the sites to be added to the group from the address book. Each selected site is marked
with a tick (√) before the site name and all the sites that are added to the group appear in the
site list.
Step 4 Select Save.
----End
Modifying
To modify the parameter settings of a defined site or group, scroll to the site or the group, and
then select , after the site name or the group name.