Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
3 Network Settings
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
24
Parameter Description
Dialing mode The default value is Manual.
Auto: If this option is selected, the terminal initiates a PPP dial-up
connection automatically. The billing system starts charging after the
dial-up connection is established successfully. If you use the monthly fee
mode, using the automatic mode for the PPP dial-up connection is
recommended.
Manual: If this option is selected, the terminal does not initiate the PPP
dial-up connection automatically. If you pay the fee based on connection
duration, using the manual mode for the PPP dial-up connection is
recommended.
Step 2 Save the settings.
----End
3.4.3 Setting 3G Dial-up Parameters and Establishing a Dial-up
Connection
After a PPP dial-up connection is established, the terminal can obtain the IP address allocated
by the server and can make calls over the 3G network.
Before connecting to the 3G network, ensure that:
The terminal is connected with a 3G data card successfully.
The 3G network is enabled.
To set the terminal's 3G dial-up parameters, do the following:
Step 1 Choose Settings > Network > 3G > 3G Dialing, and then set the parameters listed in Table
3-10.
Table 3-10 3G dial-up parameters
Parameter Description
Switch to
3G network
This specifies the 3G network operator.
Click Search to search for the existing 3G network operators.
USB device
This specifies the type of the data card. The available options are Wideband
Code Division Multiple Access (WCDMA) and CDMA2000.
APN
This specifies the name of the network access point. If a WCDMA data card
is used, you must set this parameter.
For details, contact your operator.
Number
This specifies the number used to connect to the 3G network. If a WCDMA
data card is used, you must set this parameter.
For details, contact your operator.