Filter
Top Products
HUAWEI VP9050 Executive Video Terminal
User Guide
6 Conference Initiation
Issue 03 (2011-12-10) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
39
6 Conference Initiation
6.1 Initiating a Conference Using Different Methods
The home screen provides multiple methods to initiate a conference. You can choose one
based on the actual situation.
You can define multiple sites on the terminal and call these sites at the same time to initiate a
multipoint conference. During the multipoint conference, all the sites can hear the voice and
view the video of the other sites.
6.1.1 Initiating a Conference from the Favorite Conferences
Screen
When initiating a conference from the Favorite Conferences screen, you only need to change
the settings of the preset parameters to complete the conference configuration. Then you can
initiate the conference.
To initiate a conference from the Favorite Conferences screen, do the following:
Step 1 From the home screen, select Favorite Conferences to display the Favorite Conferences
screen.
Step 2 Select a conference, and then perform the following operations as required:
Press or on the remote control twice consecutively to initiate the conference.
Select to delete the conference from the favorite conferences.
Select to edit the conference, for example, to add a site to the conference or
change the settings of the conference parameters listed in Table 6-1.
Table 6-1 Conference parameters
Parameter Description
Rate This specifies the conference rate.
Continuous
presence
This specifies the maximum number of site videos that can be viewed
simultaneously during the conference. After the continuous presence is
broadcast, the present sites can view the videos of multiple sites at the
same time.
To disable the continuous presence, select OFF.