Filter
Top Products
Black plate (77,1)
# When playing discsrecorded with more than
96 kHz sampling frequency, audio is outputted
from front speakers only.
# When selecting FM asthe source, you cannot
switch to Source Level Adjuster.
# When playing otherthan the DVD disc, you
cannot switch to DynamicRange Control.
# When neither Front-L nor Front-R isselected
in Position, you cannot switchto
Time Alignment.
# When both the centerspeaker and the rear
speaker are set toOFF in the speaker setting,you
cannot switch to DolbyPro Logic II.
2 Touch ESC to return to the ordinary dis-
play.
# To return to the previous display, touchBack.
Using the position selector
One way to assure a more natural sound is to
accurately position the stereo image, putting
you right in the center of the sound field. The
position selector function lets you automati-
cally adjust the speaker output levels and in-
serts a delay time to match the number and
position of occupied seats. When used in con-
junction with the SFC, the feature will make
the sound image more natural and offer a pa-
noramic sound that envelops you.
1 Touch Position on the DSP function
menu.
2 Touch c/d/a/b to select a listening po-
sition.
Touch one of these, c/d/a/b, to select a lis-
tening position as listed in the table.
Key Display Position
c Front-L Front seatleft
d Front-R Frontseat right
a Front Front seats
b All All seats
# To cancel the selected listeningposition,
touch the same keyagain.
Note
When you make adjustments to the listening po-
sition, the speakeroutputs are automatically set
for appropriate levels.You can tailor the levels
more precisely referringto Adjusting the speaker
output levels using atest tone or Adjusting the
speaker output levels.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1 Touch Fader/Balance on the DSP func-
tion menu.
2 Touch a or b to adjust front/rear
speaker balance.
Each time you touch a or b it moves the
front/rear speaker balance towards the front or
the rear.
Front:25 to Rear:25 is displayed as the front/
rear speaker balance moves from front to rear.
# FR: 0/LR: 0 isthe proper setting when only
two speakers areused.
3 Touch c or d to adjust left/right speak-
er balance.
Each time you touch c or d it moves the left/
right speaker balance towards the left or the
right.
Left:25 to Right:25 is displayed as the left/
right speaker balance moves from left to right.
Using the sound field control
The SFC function creates the sensation of a
live performance.
<
CRB2901-A
/
N>77
Available accessories
En
77
Section
19
Available accessories