Filter
Top Products
# If auto TA and EQ has not been carried out,
Please Set Auto EQ appears. This indicates that
you cannot turn this function on.
2 Press MULTI-CONTROL to turn the auto-
equalizer on.
# To turn auto-equalizer off, press
MULTI-CONTROL again.
Using the sound retriever
The sound retriever function automatically en-
hances compressed audio and restores rich
sound.
1 Use MULTI-CONTROL to select S.Rtrv in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
2 Press MULTI-CONTROL to select the de-
sired setting.
OFF (off)—MODE1—MODE2
# MODE1 is effective for the low compression
rate.
# MODE2 is effective for the high compression
rate.
# This function can be used for the audio data
stored in aCD, DVD, Bluetooth Audio, iPod, USB
or AUX.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Use MULTI-CONTROL to select LOUD in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
2 Press MULTI-CONTROL to turn loudness
on.
# To turn loudness off, press MULTI-CONTROL
again.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
! Settings are based on the FM volume level,
which remains unchanged.
1 Compare the FM volume level with the
level of the source you wish to adjust.
2 Use MULTI-CONTROL to select SLA in
the audio function menu.
Refer to Introduction of audio adjustments on
page 24.
3 Push MULTI-CONTROL up or down to
adjust the source volume.
Each time MULTI-CONTROL is pushed up or
down, source volume increases or decreases.
+4 to –4 is displayed as the source volume is
increased or decreased.
Notes
! The AM volumelevel canalso be adjusted
with source level adjustments.
! The built-in CD player and the multi-CD player
are set tothe same source level adjustment
volume automatically.
! External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Auto TA and EQ (auto-time
alignment and auto-
equalizing)
The auto-time alignment is automatically ad-
justed for the distance between each speaker
and the listening position.
The auto-equalizer automatically measures
the car interior acoustic characteristics, and
then creates the auto-equalizer curve based
on that information.
Audio Adjustments
En
31
Section
03
Audio Adjustments