Filter
Top Products
# Your phone should now be temporarily con-
nected. However, to make best use of the technol-
ogy, we recommend you register the phone to
this unit.
2 Registration
To register your temporarily connected phone,
refer to Registering a connected cellular phone
on page 57.
3 Volume adjustment
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is recorded in this unit as the default set-
ting.
# Caller’s voice volumeand ring volume may
vary depending on the type of cellular phone.
# If the difference between the ring volume and
caller’s voice volumeis big, overall volume level
may become unstable.
# Before disconnecting the cellularphone from
this unit, makesure to adjust the volume to a
proper level. If the volume is muted (zero level)on
your cellular phone, the volume level of your cel-
lular phone remains muted even after the cellular
phone is disconnected.
Making a phone call
Voice recognition
1 Press B and hold until Voice dial ap-
pears in the display.
Voice dial appears in the display. When
Voice dial ON is displayed, voice recognition
function is now ready.
# If your cellular phone does not feature voice
recognition function, No voice dial appears in
the display and operation is not possible.
2 Pronounce the name of your contact.
Taking a phone call
Answering or rejecting an incoming call
% Answering an incoming call
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by push-
ing MULTI-CONTROL up.
% End a call
Push MULTI-CONTROL down.
% Rejecting an incoming call
When a call comes in, push MULTI-CONTROL
down.
Notes
! If private modeis selectedon the cellular
phone, hands-free phoning maynot be per-
formed.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Operating a call waiting
% Answering a call waiting
When a call comes in, press
MULTI-CONTROL.
# You can also perform this operation by push-
ing MULTI-CONTROL up.
% End all calls
Push MULTI-CONTROL down.
% Switch between callers on hold
Press MULTI-CONTROL.
# You can also perform this operation by push-
ing MULTI-CONTROL up.
% Rejecting call waiting
Push MULTI-CONTROL down.
Notes
! Pushing MULTI-CONTROL downends all
calls including calls waiting on line.
Available accessories
En
55
Section
06
Available accessories