Filter
Top Products
# If you push and hold MULTI-CONTROL left or
right, you can increase or decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer to Selectinga channel in
the channel category on the next page.)
Note
It may takea few seconds before you can hear
anything while this unit acquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Switching the SIRIUS display
% Press D/Scrl to switch the SIRIUS dis-
play.
Each press of D/Scrl changes the SIRIUS dis-
play in the following order:
Play time—Channel number—Channel name
—Category name—Artist name—Song title/
program title—Composer name
# Play time isdisplayed during the Instant Re-
play mode. Refer toUsing Instant Replay function
on page 48.
# Play time displayindicates thetime inverted
from the livebroadcast. Playtime is displayed in
negative number.
Storing and recalling broadcast
stations
You can easily store up to six broadcast sta-
tions for later recall.
! Six stations for each band can be stored in
memory.
1 Use MULTI-CONTROL to store the se-
lected station in memory.
Turn to change the preset number. Press and
hold to store.
The SIRIUS preset number you have selected
will flash and then remain lit. The selected sta-
tion has been stored in memory.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also change thestation by pushing
MULTI-CONTROL up or down.
# If you do not operate the list withinabout 30
seconds, the display is automatically returned to
the ordinary display.
Introduction of advanced
operations
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select
FUNCTION.
The function selection menu is displayed.
Turn to change the menu option. Press to
select.
3 Turn MULTI-CONTROL to select the
function.
Channel mode (channel select mode setting)
—Game alert (game alert setting)—
Team setting (team setting)—Game info
(game info)—Pause (pause)
Notes
! To return to the ordinary display, press B.
! If you do not operate functions within about
30 seconds, the display is automatically re-
turned to theordinary display.
! During the InstantReplay mode, youcan se-
lect Pause (pause). Refer to Using Instant Re-
play function on page 48.
! Pause is the same as that of thebuilt-in CD
player. (Refer to Pausing playback on page17.)
Available accessories
En
46
Section
06