Filter
Top Products
Note
To return to the playback display, press B.
Switching the seek mode
There are two method of seek tuning settings,
one is Seek HD (Digital broadcasting stations
seek) and the other is Seek ALL (normal seek).
1 Use MULTI-CONTROL to select
Seek mode in the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Seek ALL—Seek HD
Switching the reception mode
If a digital broadcast reception condition gets
poor, this unit automatically switches to the
analog broadcast of the same frequency level.
If this function is set to on, the tuner switches
between digital broadcast and analog broad-
cast automatically. If this function is off, recep-
tion will be conducted within an analog
broadcast.
1 Use MULTI-CONTROL to select Blending
in the function menu.
Refer to Introduction to advanced operations
on the previous page.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
ON—OFF
Playing songs on iPod
Basic operation
You can use this unit to control an interface
adapter for iPod (e.g. CD-IB100N), which is sold
separately.
1 Song number indicator
2 Voltage indicator
Shows the battery voltage.
! The level displayed on the voltage indi-
cator may differ from the actual voltage
level.
3 Play time indicator
4 Song time (progress bar)
% Fast forward or reverse
Push and hold MULTI-CONTROL left or right.
% Select a track
Push MULTI-CONTROL left or right.
Notes
! Read the precautions foriPod in the following
section. Refer to page 72.
! If an errormessage is displayed, refer to Error
messages on page 68.
! When the ignition switch is set to ACC orON,
the iPod’s battery is charged while the iPod is
connected to this unit.
! While the iPod is connected to this unit, the
iPod cannot be turnedon or off.
! Before connecting the iPod to this unit, dis-
connect the headphones fromthe iPod.
! The iPod is turned off abouttwo minutes after
the ignition switch is set to OFF.
Available accessories
En
50
Section
06