Filter
Top Products
# Pause is the same as that of thebuilt-in CD
player. (Refer to Pausing playback on page17.)
Notes
! To return to the ordinary display, press B.
! If a Bluetooth audio player is notconnected to
this unit yet,Connection openand
Device info. appear in the function menu and
other functions are not available.
! If a Bluetooth audio player is connectedvia
AVRCP (Audio/Video Remote Control Profile),
Connection open does not appear in the
function menu.
! If a Bluetooth audio player is connectedvia
A2DP (Advanced Audio Distribution Profile) ,
only Disconnect audio and Device info. ap-
pear in the function menu.
! If you do not operate functions other than
Connection open and Disconnectaudio
within about 30 seconds, the display is auto-
matically returned to the ordinary display.
Connecting a Bluetooth audio
player
1 Use MULTI-CONTROL to select
Connection open in the function menu.
Refer to Function and operation on the previous
page.
2 Press MULTI-CONTROL to open the con-
nection.
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit is automatically established.
Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or inits accompa-
nying documentation. Refer to EnteringPIN code
for Bluetooth wireless connection on page 39.
Playing songs on a Bluetooth
audio player
1 Use MULTI-CONTROL to select Play in
the function menu.
Refer to Function and operation on the previous
page.
2 Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Use MULTI-CONTROL to select Stop in
the function menu.
Refer to Function and operation on the previous
page.
2 Press MULTI-CONTROL to stop the play-
back.
Disconnecting a Bluetooth
audio player
1 Use MULTI-CONTROL to select
Disconnect audio in the function menu.
Refer to Function and operation on the previous
page.
2 Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now disconnected from this
unit.
Displaying BD (Bluetooth
Device) address
1 Use MULTI-CONTROL to select
Device info. in the function menu.
Refer to Function and operation on the previous
page.
2 Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
Available accessories
En
53
Section
06
Available accessories