Filter
Top Products
En-14
Connections
Connecting the AV
Receiver
Speaker Configuration
The following table indicates the channels you should
use depending on the number of speakers that you
have.
No matter how many speakers you use, a powered
subwoofer is recommended for a really powerful and
solid bass.
To get the best from your surround sound system,
you need to set the speaker settings automatically
(➔ page 28) or manually (➔ page 65).
Speaker Configuration
5.1-channel:
7.1-channel: +
7.1-channel: +
7.1-channel: +
9.1-channel: + +
9.1-channel: + +
9.1-channel: + +
11.1-channel
*1
: + + +
*1
By using a combination of the built-in power amplifier for
9-channel and an external power amplifier for 2-channel,
you can enjoy up to 11.1-channel playback.
Using Powered Subwoofers
To find the best position for your subwoofer, while
playing a movie or some music with good bass,
experiment by placing your subwoofer at various
positions within the room, and choose the one that
provides the most satisfying results.
You can connect the powered subwoofer with two
SUBWOOFER PRE OUT jacks respectively.
The same signal is output from each jack.
Tip
• If your subwoofer is unpowered and you’re using an
external amplifier, connect the subwoofer pre out jack to an
input on the amplifier.
Connections
Connecting Your Speakers
Front speakers
Center speaker
Surround speakers
Subwoofer(s)
Surround back speakers
Front high speakers
Front wide speakers
Number of
speakers
2 3 4 5 6 7 7 7 8 8 9 9 9 10 11
Front
speakers
✔✔✔✔✔✔✔✔✔✔✔✔✔✔ ✔
Center
speaker
✔ ✔✔✔✔✔✔✔✔✔✔✔ ✔
Surround
speakers
✔✔✔✔✔✔✔✔✔✔✔✔ ✔
Surround
back speaker
✔✔✔✔
Surround
back
speakers
✔✔✔✔
Front high
speakers
✔✔✔✔✔✔
Front wide
speakers
✔✔✔✔✔✔
Corner
position
1/3 of wall
position