Filter
Top Products
Playback
En-56
The Home menu provides quick access to frequently
used menus.
Tip
• The on-screen menus appear only on a TV that is
connected to HDMI OUT MAIN.
■ Setup
`With this selection, you can access the common
settings of the on-screen Setup menu.
Press ENTER to display the Setup menu
(➔ page 61).
■ InstaPrevue
`With this selection, you can preview audio/video
streams coming from HDMI inputs. Even with
multiple components connected through HDMI,
you can easily switch between inputs as their
previews are displayed on a single screen.
Press ENTER to display the main preview
(currently selected HDMI input) and the
additional previews (
HDMI IN 1/2/3/4/AUX
INPUT
*1
). Using / or / to select a preview
thumbnail and pressing ENTER will switch the
AV receiver to that input source.
■ Firmware Update
`With this selection, you can update the firmware
of the AV receiver. Note that this selection will be
grayed out for a short while after the AV receiver
is turned on. Please wait until it becomes
operable.
Press ENTER to start the procedure
(➔ page 104).
■ Network Service
You need to connect the AV receiver to your home
network (➔ pages 20, 31).
`With this selection, you can use various Internet
radio services or play the contents stored in media
connected to your home network (➔ pages 36 to
40). Note that this selection will be grayed out for
a short while after the AV receiver is turned on.
Please wait until it becomes operable.
Press ENTER to display the network service
screen. If you want to use the Internet radio
services, use / / / to select the desired
service. Pressing ENTER again switches to that
selection. If you want to play music files on a
computer or media server, use / / / to
select “DLNA” and then press ENTER. If you
want to play music files on a computer or NAS
(Network Attached Storage), use / / / to
select “Home Media” and then press ENTER.
■ USB
`With this selection, you can play contents of
portable players and USB storage devices
connected to the AV receiver’s USB port
(➔ page 36). Note that this selection will be
grayed out for a short while after the AV receiver
is turned on. Please wait until it becomes
operable.
Press ENTER to select a drive or browse the
contents of the media connected, followed by
/ to select the desired folder or track.
Pressing ENTER as a track is selected will start
playback.
Using the Home Menu
1
Press RECEIVER followed by HOME.
The Home menu will be superimposed on the TV
screen.
Tip
• Alternatively, you can use HOME on the AV receiver.
2
Use / or / and ENTER to make the
desired selection.
Press HOME to close the menu.
Tip
• You can also access frequently used settings from Quick
Setup (➔ page 57).
Tip
• If no video signals are present, the thumbnails will be
filled in black.
• You can specify the number of preview thumbnails as
well as their positioning on screen (➔ page 80).
Note
• This function cannot be selected when the “Zone 2
Monitor Out” setting is set to “Use” (➔ page 62).
• Depending on video signals, the picture may not be
properly rendered on the preview thumbnails of
InstaPrevue.
*1
When HDMI IN 1/2/3/AUX INPUT is displayed on the
main preview, HDMI IN 4 is also displayed on the
preview thumbnails.