Filter
Top Products
Controlling Other Components
En-95
You can program the remote controller’s ACTIVITIES
to perform a sequence of remote control actions.
Example:
To play a CD you typically need to perform the
following actions:
1. Press RECEIVER to select the Receiver remote
controller mode.
2. Press RECEIVER to turn on the AV receiver.
3. Press TV/CD to select the TV/CD input source.
4. Press to start playback on the CD player.
You can program ACTIVITIES so that all four actions
are performed with just one button press.
Making Macros
Each ACTIVITIES can store one macro, and each
macro can contain up to 32 commands.
Note
• MODE cannot be operated during the macro-making
process.
• Once you assign new macro commands, the previously
registered macro will no longer work. If you wish to retrieve
it, you will have to reassign the commands with the macro-
making.
Running Macros
Deleting Macros
Note
• When Normal macros are deleted, ACTIVITIES are
restored to their default settings, namely the Easy macro
commands (➔ page 55).
• When using Normal macros, Easy macros cannot be used,
which includes changing the source components.
Using Normal Macros
1
While holding down RECEIVER, press and
hold down MY MOVIE, MY TV, or MY MUSIC
until MY MOVIE, MY TV, or MY MUSIC lights
(about 3 seconds).
2
Press the buttons whose actions you want to
program into the macro in the order you want
them performed.
For the CD example above, you would press the
following buttons: RECEIVER, TV/CD, .
RECEIVER
MY MOVIE,
MY TV,
MY MUSIC
ALL OFF
3
When you’ve finished, press ACTIVITIES
again.
ACTIVITIES button flashes twice.
If you enter 32 commands, the process will
finish automatically.
1
Press MY MOVIE, MY TV, or MY MUSIC.
The commands in the macro are transmitted in
the order in which they were programmed. Keep
the remote controller pointed at the AV receiver
until all of the commands have been transmitted.
Macros can be run at any time, regardless of the
current remote controller mode.
1
While holding down HOME, press and hold
down ALL OFF until ALL OFF lights (about 3
seconds).
2
Press ALL OFF again.
ALL OFF flashes twice.