Filter
Top Products
En-87
Operating
procedure
(➔ page 61)
Controlling Other Components
Controlling Other
Components
You can use the AV receiver’s remote controller to
control your other AV components, including those
made by other manufacturers. This section explains
how to enter the remote control code for a component
that you want to control: DVD, TV, CD, etc.
See “Learning Commands” for learning commands
directly from another component’s remote controller
(➔ page 94).
See “Using Normal Macros” for programming
ACTIVITIES to perform a sequence of remote control
actions (➔ page 95).
The following REMOTE MODE buttons are
preprogrammed with remote control codes for
controlling the components listed. You do not need to
enter a remote control code to control these
components.
For details on controlling these components, see the
indicated pages.
You can look up for an appropriate remote control
code from the on-screen menu.
Note
• You need to connect your TV to the HDMI output (HDMI
OUT MAIN) to make the following on-screen setting.
You’ll need to enter a code for each component that
you want to control.
Preprogrammed Remote Control
Codes
BD/DVD Onkyo Blu-ray Disc player (➔ page 89)
TV/CD Onkyo CD player (➔ page 88)
STB/DVR Apple TV
Looking up for Remote Control Codes
1
Press RECEIVER followed by HOME.
2
Use / or / to select “Setup”, and then
press ENTER.
3
Use / to select “Remote Controller Setup”,
and then press ENTER.
4
Use / to select “Remote Mode Setup”, and
then press ENTER.
5
Use / to select a remote mode, and then
press ENTER.
The menu of category selection appears.
6
Use / to select a category, and then press
ENTER.
The keyboard screen for brand name input
appears.
7
Use / / / to select a character, and then
press ENTER.
Repeat this step for the first three characters of
the brand name.
When you have entered the 3rd character, select
“Search” and press ENTER.
A list of brand names is retrieved.
If the desired brand name is not found:
Use to select “Not Listed”, and then press
ENTER.
The keyboard screen for brand name input
appears.
8
Use / to select a brand, and then press
ENTER.
A remote control code with its instructions are
displayed. Follow the procedure.
9
If you can control the component, use / to
select “OK”, and then press ENTER.
The on-screen menu returns to the “Remote
Mode Setup” front screen.
If you cannot control the component, use /
to select “Try Next Code” and press ENTER.
The next code is displayed.
Entering Remote Control Codes
1
Look up the appropriate remote control code
in the separate Remote Control Codes list.
The codes are organized by category (e.g., DVD
player, TV, etc.).
2
While holding down the REMOTE MODE
button to which you want to assign a code,
press and hold down DISPLAY (about 3
seconds).
The REMOTE MODE button lights.
Note
• Remote control codes cannot be entered for
RECEIVER and the multi zone button.
• Only TV remote control codes can be entered for TV.
• Except for RECEIVER, TV, and the multi zone button,
remote control codes from any category can be
assigned for the REMOTE MODE buttons. However,
these buttons also work as input selector buttons, so
choose a REMOTE MODE button that corresponds
with the input to which you connect your component.
For example, if you connect your CD player to the CD
input, choose TV/CD when entering its remote control
code.