Filter
Top Products
Advanced Operations
En-84
12V Trigger Out
When Zone 2/3 is turned on, the output from the 12V
TRIGGER OUT jack goes high (+12 V and max.
150 mA for Zone 2, +12 V and max. 25 mA for
Zone 3). Connecting this jack to a 12-volt trigger input
on a component in Zone 2/3 will make that
component turn on or off as the AV receiver turns on
or off the Zone 2/3.
Zone 2 Video Output
Tip
• The on-screen information appears on the TV screen in
Zone 2 by connecting the TV to HDMI OUT ZONE 2 of the
AV receiver with HDMI cable.
The AV receiver allows you to enjoy the HDMI
audio/video in Zone 2 by connecting the TV of
Zone 2.
Note
• If you use HDMI OUT ZONE 2, make sure to set “Zone 2
Monitor Out” to “Use” (➔ page 62).
• Video and audio signals from an HDMI input will be output
to HDMI OUT ZONE 2.
• The information of connected component appears on a TV
in Zone 2 by pressing DISPLAY.
■ Operating on the AV receiver
Tip
• The Whole House Mode function shares the input source of
main room with Multi Zone (➔ page 54).
■ Operating on the remote controller
To control Zone 2/3, you must press ZONE on the
remote controller first.
ZONE turns red when Zone 2 is on, and green when
Zone 3 is on.
Main room
TV
Zone 2
AV receiver
TV
Controlling Multi Zone Components
ZONE 2 ZONE 3
MASTER VOLUME
ON/STANDBY
Input selector buttons
1
To turn on Zone 2/3 and select an input source,
press ZONE 2 or ZONE 3 followed by an input
selector button within 8 seconds.
Zone 2/3 turns on, the Z2 or Z3 indicator lights on
the AV receiver’s display.
Tip
• The corresponding trigger output goes high (+12 V).
To select AM or FM, press ZONE 2 or ZONE 3
and the TUNER input selector repeatedly.
To select the same source as the main room’s,
press ZONE 2 or ZONE 3 twice. “Zone 2
Selector: Source” or “Zone 3 Selector: Source”
appears on the AV receiver’s display.
2
To turn off Zone 2/3, press ZONE 2 or ZONE 3
followed by ON/STANDBY within 8 seconds.
The zone is turned off.
Tip
• The corresponding trigger output goes low (0 volts).
RECEIVER
MUTING
VOL /
ZONE
Input selector buttons