Filter
Top Products
Advanced Operations
En-77
Operating
procedure
(➔ page 61)
■ Analog/PCM/Digital
With this setting, you can specify the listening mode
used when an analog (CD, TV, LD, VHS, MD,
turntable, radio, cassette, cable, satellite, etc.) or
PCM digital (CD, DVD, etc.) audio signal is played.
Note
• For the “GAME2” input selector, only “PCM” is available.
■ Mono/Multiplex Source
With this setting, you can specify the listening mode
used when a mono digital audio signal is played
(DVD, etc.).
■ 2ch Source
With this setting, you can specify the listening mode
used when 2-channel (2/0) stereo digital sources,
such as Dolby Digital or DTS, are played.
■ Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode
used when Dolby Digital or Dolby Digital Plus format
digital audio signals are played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
■ DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode
used when DTS or DTS-HD High Resolution format
digital audio signals are played (DVD, LD, CD, etc.).
Specifies the default listening mode for DTS-HD
Master Audio sources, such as Blu-ray or HD DVD
(input via HDMI).
■ Other Multich Source
Specifies the default listening mode for multichannel
PCM sources from HDMI IN such as DVD-Audio, and
DSD multichannel sources such as Super Audio CD.
Volume Setup
■ Volume Display
`Absolute
:
Displayed range is Min, 0.5 to 99.5, Max.
`Relative(THX):
Displayed range is – dB, –81.5dB to +18.0dB.
With this setting, you can choose how the volume level
is displayed.
The absolute value 82 is equivalent to the relative
value 0 dB.
Note
• If the absolute value is set to 82, “82.0Ref” will appear on
the display and the THX indicator will flash.
■ Muting Level
`–
dB (fully muted), –50dB to –10dB in 10 dB
steps.
This setting determines how much the output is muted
when the muting function is used (➔ page 54).
■ Maximum Volume
`Off
, 50 to 99 (Absolute display)
`Off
, –32dB to +17dB (Relative display)
With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.
■ Power On Volume
`Last
, Min, 1 to 99 or Max (Absolute display)
`Last
, – dB, –81dB to +18dB (Relative display)
With this preference, you can specify the volume
setting to be used each time the AV receiver is turned
on.
To use the same volume level that was used when
the AV receiver was turned off, select “Last”.
The “Power On Volume” setting cannot be set higher
than the “Maximum Volume” setting.
■ Headphone Level
`–12dB to 0dB
to +12dB
With this setting, you can specify the headphone
volume relative to the main volume. This is useful if
there’s a volume difference between your speakers
and your headphones.
OSD Setup
■ On Screen Display
`On
`Off
This preference determines whether operation details
are displayed on-screen when an AV receiver
function is adjusted.
Even when “On” is selected, operation details may
not be output if the input source is connected to an
HDMI IN.
■ Language
(North American models)
`English
, Deutsch, Français, Español, Italiano,
Nederlands, Svenska
(European and Australian models)
`English
, Deutsch, Français, Español, Italiano,
Nederlands, Svenska, Русский язык,
This setting determines the language used for the on-
screen menus.
■ Screen Saver
`3min
, 5min, 10min
`Off
With this setting, you can set the time until the screen
saver activates itself. Once active, the screen saver
will go off and the screen will return to its previous
state if the AV receiver is operated in any way.
• For the “BLUETOOTH” input selector, only “Digital” is
available.
6. Miscellaneous