Onkyo TX-NR929 Car Stereo System User Manual


 
Playback
En-47
Listening Modes
All Ch Stereo Ideal for background music, this mode
fills the entire listening area with stereo
sound from the front, surround, and
surround back speakers.
Full Mono In this mode, all speakers output the
same sound in mono, so the sound you
hear is the same regardless of where
you are within the listening room.
T-D (Theater-
Dimensional)
With this mode you can enjoy a virtual
surround sound even with only two or
three speakers. This works by
controlling how sounds reach the
listener’s left and right ears. Good
results may not be possible if there’s too
much reverb, so we recommend that
you use this mode in an environment
with little or no natural reverb.
Listening Mode Description Input
Source
Speaker
Layout
Pure Audio
*1
In this mode, the display and video
circuitry are turned off, minimizing
possible noise sources for the ultimate in
high-fidelity audio reproduction. (As the
analog video circuitry is turned off, only
video signals input through HDMI IN can
be output from the HDMI output.)
*2
Direct In this mode, audio from the input source
is output without surround-sound
processing. The speaker configuration
(presence of speakers) and speaker
distance settings are enabled, but much
of the processing set via the audio setup
is disabled. See “On-screen Setup” for
more details (page 57).
Listening Mode Description Input
Source
Speaker
Layout
All Ch Stereo
Ful Monol
T D
PureAAud io
Direc t
Stereo Sound is output from the front left and
right speakers and subwoofer.
Mono Use this mode when watching an old
movie with a mono soundtrack, or use it
with the foreign language soundtracks
recorded in the left and right channels of
some movies. It can also be used with
DVDs or other sources containing
multiplexed audio, such as karaoke
DVDs.
Multichannel This mode is for use with PCM
multichannel sources.
DSD
*3
In this mode, audio from the input source
is output without surround-sound
processing. The speaker configuration
(presence of speakers), crossover
frequency, speaker distance, A/V Sync
and much of the processing set via the
audio setup are enabled. See “On-
screen Setup” for more details
(page 57).
Dolby Digital
Dolby Digital Plus
*4
*2
Dolby TrueHD
*2
DTS
DTS-HD High
Resolution Audio
*2
Listening Mode Description Input
Source
Speaker
Layout
Stereo
Mono
Mu l t i ch
DSD
Dolby D
Dolby D +
Dolby TrueHD
DTS
DTSHD HR