Filter
Top Products
RV-5 Setup
3-13
To activate the Test Tone:
1. Press the Menu or Select button to enter the Menu structure.
2. Select Setup from the Main menu.
3. Select Speaker/EQ Setup.
4. Select Manual.
5. Select Output Levels.
6. Press the remote control and arrows to highlight the Test
Tone parameter.
7. Press the remote control SELECT or arrow button to select
the Test Tone parameter.
8. Press the remote control arrow to select manual test tones.
The Test Tone parameter displays MANUAL and the highlighted
parameter is now Front Left. You should hear the test tone in
the Front Left speaker.
9. Press the remote control arrow to select automatic test
tones. The Test Tone parameter displays AUTO and the
highlighted parameter is now Front Left. You should hear the
test tone in the Front Left speaker, then in the Center speaker,
and so on through the list. After the last speaker, the test tone
will return to the Front Left speaker and continue down the list
again.
10. To stop the Test Tone, use the remote control and arrows
to highlight the Test Tone parameter. The parameter will
change to OFF. The test tone can no longer be heard through
any of the speakers.