Filter
Top Products
RV-5 Tuner, PC, & Dock Controls
5-9
• AUTO/MAN mimics the MENU button on the iPod. The MENU
button backs out of the menu structure, one level at a time,
each time it is pressed.
• SAVE mimics the SELECT button on the iPod. The SELECT
button acts as a play button at the song level. The select
button drills deeper into the menu structure, one level at a
time, each time it’s pressed.
• ST/MON and FM/AM both mimic the Play/Pause (
|| ) control
of the iPod. If the playlist is not active, pressing this option
starts the playlist. If the playlist is already playing, then pressing
this option pauses it.
CHARGING THE iPOD
You may leave your iPod in the Dock even when you are not using
it as a playback source. Whenever the iPod is docked and the RV-5
is turned on, the Dock will charge the battery in the iPod.
REMOVING THE iPOD
To remove the iPod from the Dock, grasp the sides of the iPod and
pull it straight up, away from the Dock.
ZONE 2 iPOD CONTROLS
The RV-5 Receiver allows the DOCK input, and attached iPod, to be
accessed and output to either the Main Zone or the Zone 2
location. However, for the DOCK inputs, the OSD and front panel
display reflect ONLY the Main Zone activity. Therefore, if the iPod is
accessed in Zone 2, there is no visible indication on the RV-5 that a
change has been made.
To control the iPod in Zone 2 via the remote control:
1. From the “Zone 2” menu layer, select the DOCK input
(number pad key 8).
2. Page 1 of the “Zone 2” menu layer touch screen provides the
iPod controls.
To control the iPod in Zone 2 via the front panel Tuner:
1. Select the DOCK input in the Main Zone.
2. Activate the Main Zone OFF button so that the LED lights red.
The Main Zone is now off.
Note: Do NOT change the Main Zone input before pressing the OFF
button. The Main Zone MUST be turned off with the DOCK input
selected.
3. Select the DOCK input in Zone 2.
4. The front panel buttons under the TUNER heading now control
the iPod in Zone 2.