Filter
Top Products
RV-5 Appendix A
A-3
Component Video Performance
Compatibility 3-channel (Y, Pr, Pb), format-independent
Impedance 75Ω
Insertion Loss <3dB
Bandwidth >100MHz
Amplifier Outputs
Continuous Output
Power
85W per channel, 8Ω, all channels driven, 20Hz to 20kHz
Frequency Response 10Hz to 40kHz, +0, -2dB
THD + Noise <0.05%, 20Hz to 20kHz, 1W
<0.07%, 20Hz to 20kHz, 85W
IM Distortion <0.04%
Slew Rate 17V/us (Condition: output 40 Vpp, 1k sine wave, rising time
from 10% to 90%)
Signal-to-Noise Ratio 95dB typical, 22kHz bandwidth
min 95dBA, 90dBA typical
Preamplifier Outputs
Frequency Response 10Hz to 40kHz, +0, -2dB
THD + Noise <0.05%, 20Hz to 20kHz
Dynamic Range 100dB typical, 22kHz bandwidth
Signal-to-Noise Ratio 100dB typical, 22kHz bandwidth
min 100dBA, 103dBA typical
Output Level 200mV typical, 5V maximum
Audio Performance
A/D conversion 24-bit, 96kHz, dual-bit ΔΣ
D/A conversion 24-bit, 44.1 to 192kHz, multi-bit ΔΣ
Input Sensitivity 400mV for Analog 1 to 6, and 400mV for 8-ch input
Input Impedance 98.5kΩ for Analog 1 to 6, and 32kΩ for 8-ch input
FM Tuner Performance
Tuning Range 87.5MHz to 108MHz
Sensitivity IHF 8 uV/19.2dBf
Selectivity +/- 400kHz, 70dB
Signal-to-Noise Ratio Mono: 70db, Stereo: 65dB
Image Rejection 43dB
IF Rejection 75dB
Stereo Separation 51dB @ 1kHz
Distortion Mono: 0.2%, Stereo: 0.1%
AM Tuner Performance
Tuning Range 520kHz to 1720kHz
Sensitivity Loop 177uV/m
Selectivity +/- 10kHz, 25dB
Signal-to-Noise Ratio 45dB
Image Rejection 32dB
IF Rejection 40dB
Distortion 1.2%