Filter
Top Products
Setup Lexicon
3-22
FILM EDIT DETECT OFF, ON
Applies additional processing when film-based material is detected
so that any disruption in the frame sequence of film-based material
due to video edits or overlay of video text over film is compensated
for by processing, before artifacts such as feathering may appear.
FLESHTONE NR OFF, ON
Selects the Fleshtone NR (Noise Reduction) parameter, which
preserves the detail in faces and flesh tones while reducing noise in
the total picture.
COMPNT ENHANCE OFF, ON
Selects the Component Video Enhance parameter, which processes
incoming component video signal to adjust the high-frequency
content of the signal resulting in enhanced depth in the picture as
well as greater small object detail.
BRIGHTNESS 50 TO 150
Changes the video level to a darker or brighter setting. The
BRIGHTNESS adjustment range is 50 to 150 in single increments.
CONTRAST 50 TO 150
Changes the black level of the video to compensate for poor
contrast. The CONTRAST adjustment range is 50 to 150 in single
increments.
COLOR 50 TO 150
Changes the color of the video to compensate for over- or under-
color saturation conditions. The COLOR adjustment range is 50 to
150 in single increments.
INPUT SETUPSETUP
ADVANCED VIDEO
FILM EDIT DETECT
INPUT SETUPSETUP
ADVANCED VIDEO
FLESHTONE NR
INPUT SETUPSETUP
ADVANCED VIDEO
COMPNT ENHANCE
INPUT SETUPSETUP
ADVANCED VIDEO
BRIGHTNESS
INPUT SETUP
SETUP
ADVANCED VIDEO
CONTRAST
INPUT SETUP
SETUP
ADVANCED VIDEO
COLOR