Filter
Top Products
Setup Lexicon
3-20
ADVANCED VIDEO
Selecting the SETUP menu INPUT SETUP menu ADVANCED VIDEO option opens the ADVANCED VIDEO menu, a two-screen menu which
provides user-adjustable controls for sharpness, noise reduction, brightness, and other video fine-tuning.
Note: Most of the Advanced Video parameters are only available when the V-Process parameter is set to FAROUDJA.
INPUT TYPE
Identifies the type of device being used for the input source. Once
the selection is made, the advanced video settings will change to
default settings that are best suited for that type of device. Manual
changes to these settings may also be made. The input types
available for selection are:
• DVD – Use with the output signal of a typical DVD player.
• VCR – Use with the output signal of an analog videocassette
recorder.
• DIG CABLE – Use with digital cable set-top boxes. Even when a
digital cable system is in use, there may be a mix of digital and
analog channels. Start with this configuration and then change
the advanced video options as needed to tailor the output to
your preferences.
• DIG SAT – Use with digital satellite system set-top boxes.
• ANLG CABLE – Use with analog cable set-top boxes.
• ANLG SAT – Use with analog satellite system set-top boxes.
• DIG CAM – Use with digital camcorders or still-image cameras.
• ANLG CAM – Use with analog camcorders.
Refer to the table on the following page for the default video source
settings.
SHARPNESS 0 TO 100
Adjusts the degree to which the enhancement circuits that adjust the
high-frequency content of the signal are applied. The setting acts on
the vertical and horizontal as well as luminance and chrominance
parameters to offer an enhanced depth in the picture as well as
greater small object detail. In general, the lower settings are
applicable for digital displays and sources, while the higher settings
may be preferred for CRT-based displays and digital sources. The
Sharpness adjustment range is 0 to 100 in single increments.
INPUT TYPE: VCR
SHARPNESS: 32
NOISE REDUCTION: ON
X-COLOR SUPPRESS: ON
DCDi INTERPOL: ON
FILM DETECTION: ON
FILM EDIT DETECT: ON
ADVANCED VIDEO 1
FLESHTONE NR: ON
COMPNT ENHANCE: ON
BRIGHTNESS: 100
CONTRAST: 100
COLOR: 100
ADVANCED VIDEO 2
INPUT SETUPSETUP
INPUT SETUPSETUP
ADVANCED VIDEO
INPUT TYPE
INPUT SETUPSETUP
ADVANCED VIDEO
SHARPNESS