Filter
Top Products
RV-5 Getting Started
1-3
WHAT’S IN THE BOX
The following items are included with the RV-5 Receiver:
• One AM Radio Antenna
•One FM Radio Antenna
• One User Guide (this document)
•One Remote Control
• Four AAA Batteries (for use with Remote Control)
• One Microphone
• One Microphone Rod
• One 115V Power Cord (US Version Only)
• Two 230V Power Cords (International Version Only)
AVAILABLE OPTIONS
The following accessories are available for purchase as options to
the RV-5 Receiver:
• D-1 iPod Docking Station, Part No. 021-18138, allows an iPod
to be connected and controlled by the RV-5 Receiver.
• RF-1 Receiver, Part No. 021-18005, allows the remote control
to operate via RF (Radio Frequency), giving the remote a
broader operating range.
D-1 iPOD DOCKING STATION
The optional D-1 iPod Docking Station allows you to enter a new
world of listening enjoyment made possible by combining the
increased storage capacity and playback flexibility of an iPod® (not
included) with the sonic power of your Lexicon receiver. Operation
is easy, you can use your Lexicon remote control or the front panel
of the RV-5 to access and control your iPod. Just one simple
connection and you’re ready to go!
• Single connection to your Lexicon receiver
• Plays audio from an iPod through your Lexicon receiver
• Controls your iPod through your Lexicon receiver
• Simple track selection with on-screen navigation
• Charges the iPod
RF-1 RECEIVER
The optional RF-1 Receiver utilizes the RF feature of the Lexicon remote
control, allowing you to control components that are completely
out-of-sight, up to 100-feet away. Since the RF-1 Receiver picks up the
RV-5’s remote control radio frequency signal, the remote control no
longer needs to be pointed directly at the components to control
them. Now you can close your entertainment center doors, hide your
components, and still control them with ease.
The RF-1 Receiver accessory requires no setup to the Lexicon remote
control in order for the feature to work - you need only place the RF-1
Receiver in the rack or cabinet, or attach an emitter to the RV-5 front
panel over the IR receiver. Every time a command is sent from the
remote control, it sends both a standard IR and an RF signal. The RF-1
Receiver automatically receives the remote’s radio signals and
translates them into the infrared commands that control the
components.