Filter
Top Products
Audio Controls & Video Status Lexicon
4-4
AUDIO STATUS
The AUDIO STATUS menu is an information-only menu identifying
the current audio status of the RV-5.
• INPUT identifies the currently selected input.
• NAME identifies the customer-chosen name, if any, for the
currently selected input.
• CONNECTOR identifies the current audio connector in use.
• AUDIO identifies what type of audio signal is in use.
• MODE FAMILY identifies the currently selected mode family.
• MODE identifies the currently selected listening mode.
Note: The Audio line is dashed out if the audio input is analog.
VIDEO STATUS
The VIDEO STATUS menu is an information-only menu identifying
the current video status of the RV-5.
• INPUT RESOL identifies the current input resolution setting.
• COPY PROTECTION identifies the current status of copy
protection.
• V-PROCESS identifies the current setting of the video processor.
• OUTPUT RESOL identifies the current output resolution setting
of the HDMI and component outputs.
Note: The HDMI and component output resolution values are always
the same, unless copy protection is active. In some cases, copy
protected inputs can restrict the component output format options.
• COMPONENT OUT identifies the currently selected
component output status as described below.
• S-VIDEO OUT identifies the currently selected S-video output
status as described below.
• COMPOSITE OUT identifies the currently selected composite
output status as described below.
The Component, S-Video, and Composite Out parameters all reflect
the interaction between the input type (which is not listed in the
Video Status menu), the copy protection status, the video process
parameter setting, and the current output resolution.
Therefore...
• COMPONENT OUT displays “OFF” if the component output is
disabled for the current video input and processing
configuration. Otherwise, it displays “Enabled”.
• S-VIDEO OUT displays “OFF’ if the S-video output is disabled
for the current video input and processing configuration.
Otherwise, it displays the current output resolution.
• COMPOSITE OUT displays “OFF’ if the composite output is
disabled for the current video input and processing
configuration. Otherwise, it displays the current output
resolution.
AUDIO CONTROLS
AUDIO STATUS
INPUT: HD+
NAME:
CONNECTOR: ANALOG 3
AUDIO: - - -
MODE FAMILY: LOGIC 7
MODE: MUSIC 5.1
VIDEO STATUS
INPUT RESOL: - - -
VIDEO STATUS
COPY PROTECTION: OFF
V-PROCESS: FAROUDJA
OUTPUT RESOL: - - -
COMPONENT OUT: 480i
S-VIDEO OUT: OFF
COMPOSITE OUT: OFF