173
3
Chapter 3. VOICE MODE
7. Bank number
• Bank Number specifies the Bank Select LSB of the voice
that will be used by each part.
• Voices are selected by three values: Voice Category, Bank
Number and Program Number.
• If the Voice Category is other than
(Normal Voice), the
Bank Number will be fixed at 000.
0101
1101
000–101 (discontinuous)
• For details on bank selection, refer to “Chapter 1. BASIC
CONCEPTS”. (→ p.43)
• For bank numbers, refer to the separate “QY700 Reference
Listings”.
8. Reverb send
• This specifies the amount that will be sent from each part to
the Reverb effect, adjusting the reverb depth.
• When making this setting, take into consideration the Ef-
fect mode Reverb Return setting (→ p.191).
0101
1101
000–127
9. Chorus send
• This specifies the amount that will be sent from each part to
the Chorus effect, adjusting the chorus depth.
• When making this setting, take into consideration the Ef-
fect mode Chorus Return setting (→ p.192).
0101
1101
000–127
10. Variation switch / Variation send
• If the Effect mode Variation Mode (→ p.190) is set to Inser-
tion, this setting functions as the Variation Switch, specify-
ing the part which will use the Variation effect.
Only one selected part can be turned on.
• If the Effect mode Variation Mode (→ p.190) is set to Sys-
tem, this setting functions as the Variation Send Level, set-
ting the amount that will be sent from each part to the Vari-
ation effect, and thus adjusting the depth of the effect.
• When making this setting, take into consideration the Ef-
fect mode Variation Return setting.
0101
1101
• Variation Switch
Off, On (Insertion)
• Variation Send Level
000–127 (System)
11. Pan
• This sets the pan position (stereo location) for stereo play-
back.
• During playback, this value will follow the Pan data con-
tained in the track.
• If a Drum Voice is selected, the pan setting specified here
will function as an offset relative to the pan setting speci-
fied for each drum instrument.
• Settings of Left63–Center–Right63 will place the sound to-
ward the left, in the center, or toward the right.
• A setting of Random will produce a special effect in which
the sound be move between left and right randomly for each
note.
0101
1101
Random (0), Left63(1)–Center(64)–Right63(127)
12. Volume
• This sets the volume for each part.
• The slider located at the left edge of the display is the mas-
ter volume.
• During playback, this value will follow the Volume data
contained in the track.
0101
1101
000–127
13. Expression
• This sets the expression level for each part.
• During playback, this value will follow the Expression data
contained in the track.
0101
1101
000–127
1. Mixer
