Filter
Top Products
110 Barco - RHDM-2301 - User manual
Full functionality description
4.3.3.3 GPI settings menu
• Brightness
Controlled by: Selects the pin of the connector that controls the brightness. The possible
settings are: GPI 1, GPI 2, GPI 3 and GPI 4.
When control is low: Sets the brightness to the specified value when the input signal at the
control pin is low. The possible values are: Full, Half, 1/7, Dark.
When control is high: Sets the brightness to the specified value when the input signal at the
control pin is high. The possible values are: Full, Half, 1/7, Dark.
• Left lamp
Controlled by: Selects the pin of the connector that controls the left lamp. The possible set-
tings are: GPI 1, GPI 2, GPI 3 and GPI 4.