Filter
Top Products
70 Barco - RHDM-2301 - User manual
How to
• When software update has started (“Software update busy”) the USB stick can be removed (all
data is already transferred).
• The display unit automatically reboots after finishing the software upload.
IMPORTANT
:
If the upload of the new software would fail or would be interrupted, the display unit will reboot into the failsafe
mode. The software version of the failsafe mode is the most recent software version that was uploaded success-
fully.
NOTE
:
It is advisable to remove the USB stick after software update since the display unit will automatically recognize the
firmware on the USB stick at each power up or activation from hard standby. The display unit will then start the
automated firmware update process. This does not happen after the reboot resulting from the software update!