Filter
Top Products
Barco - RHDM-2301 - User manual 141
Full functionality description
This web page controls the settings of the UMD bar.
Under Monitor Display
•
Visible:
Visualize or hide the UMD bar
•
Controlled by:
Control the UMD bar manually or via the Tally port (GPI settings).
Manual settings:
These settings only apply when “manual” control has been selected.
•
UMD text:
Type the text you want to display on the UMD bar
•
Brightness:
Select the brightness of the UMD bar (Full, Half, 1/7 or Dark)
•
Text color:
Select the color of the text (Red, Green, Amber, Off)
•
Left Tally lamp:
Select the color of the left Tally lamp (Red, Green, Amber, Off)
•
Right Tally lamp:
Select the color of the right Tally lamp (Red, Green, Amber, Off)
GPI
Brightness
•
Controlled by:
Select the pin to control the brightness of the UMD bar (GPI1, GPI2, GPI3 or
GPI4)
•
Signal low:
Select the brightness if the signal at the selected pin is low (Full, Half, 1/7 or Dark)
•
Signal high:
Select the brightness if the signal at the selected pin is high (Full, Half, 1/7 or
Dark)
Left tally lamp
•
Controlled by:
Select the pin to control the color of the left lamp on the UMD bar (GPI1, GPI2,
GPI3 or GPI4)
•
Signal low:
Select the color of the left lamp if the signal at the selected pin is low (Red, Green,
Amber, Off)
•
Signal high:
Select the color of the left lamp if the signal at the selected pin is high (Red, Green,
Amber, Off)
Right tally lamp
•
Controlled by:
Select the pin to control the color of the right lamp on the UMD bar (GPI1, GPI2,
GPI3 or GPI4)
•
Signal low:
Select the color of the right lamp if the signal at the selected pin is low (Red, Green,
Amber, Off)
•
Signal high:
Select the color of the right lamp if the signal at the selected pin is high (Red,
Green, Amber, Off)
UMD text
•
Controlled by:
Select the pin to control the color of the text on the UMD bar (GPI1, GPI2, GPI3
or GPI4)