Filter
Top Products
Barco - RHDM-2301 - User manual 41
How to
Up to 2 inputs can be applied to the SDI board simultaneously. In the table below the possible
combinations are shown:
To select a valid signal, open the
input selection toolbox
by pressing long (
) on the button of
the window in which the input signal has to be shown
or
.
The concept of selection and viewing of the valid signals is summarized in the figure below:
Figure 11: Selection of inputs window 1 & 2
To toggle between the input options for the active window, press (
) the same button to toggle
between the input options. The selected input is shown instantaneously. To change the active
window, press (
) the button of the other window. The other window will be activated
instantaneously.
Input SDI board Input 1 Input 2
Possible inputs
SDI
HDSDI
3Gb/s (optional)
SDI
HDSDI
3Gb/s (optional)
Dual link (optional)
INPUT 1
INPUT 2
WINDOW 1
WINDOW 2
ACTIVE WINDOW
is shown on screen
INPUT 1
INPUT 2
press
press
press
press