Filter
Top Products
Barco - RHDM-2301 - User manual 61
How to
3.15.3 3D-LUT upload via web interface
• Connect the display unit to the local network
Plug an ethernet cable in ethernet port 0 or ethernet port 1.
• Connect with the pc to the display unit
Check the IP address that is assigned to the ethernet port. Press (
)
to open the “Dis-
play Information” toolbox. Write down the IP address of the corresponding ethernet port.
Open a browser window and type in the Address bar: “http://” + the IP address + “/” (e.g.
“http://150.158.200.140”). The web interface of the display unit will open.