Filter
Top Products
28 Barco - RHDM-2301 - User manual
First operation
5. Upload license file to monitors
• Copy the obtained license file to an USB stick, but make sure that the file name is ‘barcoLicense’
(no extension, case sensitive)
• There is only one license file for all monitors that have been registered with this procedure. Plug
the USB stick in each monitor that has been registered and wait 1-2s. until it becomes activated.
• The display unit will recognize the license file automatically. The following message appears
when the update is successful. The display unit should function immediately.
IMPORTANT
:
Important note: Only license files with a filename “barcoLicense” (case sensitive, no extensions) will be recognized
by the RHDM. If you obtain a file that has additional information in its name (such as customer reference, serial
number etc), then rename the file to barcoLicense for purposes of license upload, and keep a copy of the original
file for your records.
IMPORTANT
:
Important note: Verify that the USB stick used to install the license file does not contain a RHDM software package
(xxx.deb) or a 3D LUT file (3d.lut) in its root. Software updates always have priority and will prevent the license
from being installed.