Filter
Top Products
206 Barco - RHDM-2301 - User manual
Addendum
7.8.3 Mounting instructions
7.8.3.1 Barco stand
7.8.3.1.1 Barco stand
Figure 69: Display unit mounted on Barco stand – VESA mount positions
The display unit is delivered with the Barco stand already mounted. With the Barco stand, the
display unit can be placed up-right in a safe way. The Barco stand is mounted on the VESA
compatible mounting positions at the back side. The mounting positions are spaced by 100mm
horizontally and 100mm vertically (see figure above).
7.8.3.1.2 Remove the Barco stand
Instructions to remove the Barco stand from the display unit:
• Place the display unit with the front side on a horizontal, flat and stable table, covered with bub-
ble wrap or a similar protective material.
• Unscrew the 4 knurled screws and remove the Barco stand. Keep the knurled screws and the
Barco stand in a safe place in case the Barco stand has to be installed again.