Filter
Top Products
Barco - RHDM-2301 - User manual 47
How to
3.8 How to enable native interlaced mode (black line inser-
tion)
Set the Deinterlace mode to “black line insertion”:
• Go to the OSD menu by pressing (
)
• Move with the trackball to highlight the “Input settings” in the main menu
• Press (
)
or (
)
to open the “Input settings menu”
• Move with the trackball to the “Deinterlace mode” setting of the appropriate window
• Press (
)
or (
)
to select the mode
• Move with the trackball (up or down) to select “black line insertion” mode
• Press (
)
or (
)
to confirm the “black line insertion” mode
3.9 How to change the aspect ratio
Figure 15: Location of the button to change the aspect ratio
• Press (
)
to toggle between all possible aspect ratios. The aspect ratio is applied instanta-
neously to the window.
or
• Press (
)
to open the aspect ratio mode selection toolbox.
• Select the aspect ratio using the trackball.
• Press (
)
or (
)
to confirm the selection.
Track ball