Filter
Top Products
52 Barco - RHDM-2301 - User manual
How to
• Press
continuously to lock the place and use the trackball to zoom in/out. When
is
released, the magnifying glass can be moved to another window or another spot on the screen.
IMPORTANT
:
When an image is zoomed, pixel repetition is used to display the image on the screen. This means that the image
is magnified according to an integer amount. No scaling artifacts are introduced.
3.14 How to work with presets
3.14.1 Use case (Presets)
User settings can be stored in a so-called preset. There are up to 6 possible presets. The first one is
the factory preset and contains the default user settings, the next five can be used by the user to
store settings.
New settings can be loaded from one of the defined presets, which involves overwriting the current
user settings with the values defined in the preset.
Presets can be transfered from one RHDM monitor to another via USB.
3.14.2 Restoring the active preset
A short press on the calibration button loads/restores the current active preset.
Use case example:
Suppose preset 1 was loaded and is thus the current active preset.
A user changes on purpose or by accident some of the critical user settings. As a result the CAL
button will light up orange to indicate this. As explained in the LED’s subparagraph of the Control
panel paragraph.
A short press on the button
will reload preset 1, the
button will light up white to indicate
that all critical user settings are as defined in the preset again.
Basically it allows you to return to current active / last loaded preset.
IMPORTANT
:
Pressing
will remove all uploaded 3D-LUTs and custom color spaces if they are not stored under a preset.