Filter
Top Products
Barco - RHDM-2301 - User manual 19
First operation
2.4 How to register the display unit
During the first 200 hours of operation, all features on the display are enabled, so you are able to
use your display straight out of the box.
In order to continue using your product after that initial grace period, you need to install a valid
license file (which enables the software configuration you have purchased). The license file can be
obtained from our website (as explained in this document). Of course you can install a license file
before the grace period has passed, which will immediately limit the features to the ones you have
purchased.
In the box of each display unit there is an envelope with a license sheet for the product flavor you
have purchased (B or P). If you have purchased any optional ‘feature packs’, there are also
envelopes with license information for each feature pack.
The product, the license sheets for the basic flavor (B or P) and any additional license sheet, all
have their own unique pincodes that have to be registered on our website, before activating your
product.
Overview of the basic steps:
1. Switch on the display unit. Consult the installation section of this manual to install the display
unit. What happens after start-up depends on the license grace period.
• If the license grace period is still in effect, you are able to use the monitor and all its features.
The remaining grace period is shown in the top right corner.
To register the unit on the website, you will need the current pincode. To obtain it, press Menu
and scroll down to the License submenu. The current pincode is displayed there.