Filter
Top Products
Barco - RHDM-2301 - User manual 57
How to
3.14.5 Transferring presets over USB
Via OSD
User presets created on one RHDM monitor can be transferred to another monitor by using an USB
stick.
Upon plugging in an USB stick a popup menu will appear on the OSD with the option to copy
Presets from USB stick to display or vice-versa:
NOTE
:
The popup window will not appear if both display and USB stick do not contain any presets.
The presence of an upload package might also prevent the popup window from appearing.
Depending of the availibility of presets on either USB stick or monitor, the popup menu might
provide 2 or 3 options. Those 3 options are:
1.
Install presets from USB drive:
This will copy presets from the USB stick to the display. This
option is only available if the USB stick has presets in the root of the USB stick. The presets are
represented as files on the root of the USB stick and must be named '1-....pre' ... '5-.....pre',
representing presets 1 ... 5. If for example the USB stick contains two preset files in its root '1-
name1.pre' and '4-some_name.pre' then by invoking this option, presets 1 and 4 on the display
will be replaced by those on the USB stick. Note that installing presets from a USB stick also
reloads the current active preset.