Filter
Top Products
Barco - RHDM-2301 - User manual 113
Full functionality description
•
Out of gamut indication:
Option to verify if parts of the image displayed on the screen are out
of gamut of the selected color working space.
The display unit has a larger color gamut than the broadcast standards. The image/video which
is shown on the screen is in accordance with the primaries and the white point of the selected
color working space. However, if the input signal contains information which is out of gamut of
the selected color working space, or when certain adjustments have been done which drive the
shown image out the selected color working space, the display unit will show the image informa-
tion faithfully as long as it is within the gamut of the display unit.
When “out of gamut indication” is checked, the display unit will mark the image data which is out
of the selected color working space by displaying a checkerboard pattern. The fields of the
checkerboard pattern change to the other color with a frequency of 1 Hz. When R, G or B is
above 100%, a Red&Black checkerboard pattern is displayed. If R, G or B is negative, a
Blue&Black checkerboard pattern is shown. It is possible that on a specific part of the image
data, one of the primaries is above 100% while another primary is negative. In this case both
checkerboard patterns are shown on top of each other in anti-phase.
First window:
These settings apply to window 1 only.
•
Gain:
The gain is a multiplication factor that acts directly on the input signal. Please refer to the
chapter “Terminology” and read the section on the Electro Optical Transfer Function to under-
stand the impact of this setting on the shown image.
•
Resizer settings:
Determines the algorithm that is used to display the luminance information of
the image on a different number of pixels on the screen. See “Resizer filter menu” for more
details.
•
Swap field dominance:
The display unit automatically detects the correct field dominance for
interlaced fields. When an error in video transformation would occur, and the field dominance is
not set according to the definition of the detected standard, the field dominance can be swapped
manually.
User 3D LUT:
A user 3D-LUT file can be uploaded to the monitor either via the web interface or via
a USB stick. Currently the monitor supports three types of user 3D-LUT files: Truelight, Cinespace
and Autodesk. If such a 3D-LUT file is loaded into the monitor, the 3D-LUT can be enabled or
disabled here.
Second window:
the explanations of the settings is the same as for window 1.