Filter
Top Products
Barco - RHDM-2301 - User manual 217
Addendum
NOTE
:
Power voltage specifications are available in the Technical specifications section.
To power-up the display unit:
• Place the display unit up-right (on the Barco stand) or mount the display unit safely into a rack.
• Connect the power cord of the appropriate power supply to the power connector at the back of
the display unit.
• Power up the display unit by switching the power switch on.
• The display unit will start-up (you should hear the ventilators spin) and perform some checks
before displaying an image on the screen. The status of the start-up checks can be followed by
the flashing of the indicator lights. The start-up can take up to 20 seconds. Please check the sec-
tion that deals with the indicator lights for more information.