Filter
Top Products
Barco - RHDM-2301 - User manual 77
Full functionality description
IMPORTANT
:
To see which setting causes the CAL button to light up amber check the OSD submenu “Faults and warnings”.
NOTE
:
The lights behind the buttons go out 10 seconds after all activity on the control panel has stopped. The buttons
remain active when the lights after the buttons are out. Pressing a darkened button will execute the function
represented by the button immediately. Only the power button is functional when the display unit is in hard
standby.
4.1.5 Status bar
The status bar is shown at the top of the screen and contains information related to the selected
signals for window 1 and window 2.
Figure 24: Screenshot status bar (upper part – left side, lower part – right side)
The following information is shown:
• Window for which the information is valid
• Input board that is used to process the selected input signal
• Input detection overrule indicator
• Input signal description
• OETF
• Color subsampling
• Encoding
• Scale mode
• Aspect ratio