Filter
Top Products
14 Barco - RHDM-2301 - User manual
Introduction
• Do not use the display at extreme limits of temperature and humidity range. Storage and oper-
ating limits are specified in the technical specifications of the unit.
1.7.4 Requirement for dusty environments
The room in which the display unit is installed and operational must be dust-free. The room must
comply with a dust class of 8 or better according to ISO14644-1. If the room in which the display
unit is installed does not comply with the dust class stated above, please contact Barco to discuss
possibilities to protect the display unit against dust.
NOTE
:
All construction, reconstruction, decoration activities must be completed before the installation and operation of the
product.
1.7.5 LCD screen
• Do not apply pressure on the surface of the screen. If ‘waves’ are visible on the screen below the
pressing object (e.g. finger), the pressure is already too high and the LCD may already break
under these circumstances.
• Do not hit the LCD screen with hard objects.
• Do not rub the LCD screen with rough materials.
• Do not touch the LCD screen with hard materials. Hard materials can cause scratches on the sur-
face of the LCD screen. Examples of hard material are: fingernails, pencils, pens and styluses,
wooden, plastic or metal objects.
• While moving the display unit manually, hold the LCD screen away from your body to avoid
scratching the LCD screen.
• Do not paste or stick objects with glues and/or adhesive tapes on the LCD screen.
• Wipe off water droplets or oil immediately. Ignoring this precaution could lead to staining and/or
discoloration of the LCD screen.
• Do not expose the LCD screen to direct sunlight.
1.7.6 Cover
• Do not place objects on the cover.
• Do not spill fluids over the cover or the LCD screen.
• Do not push objects into ventilation openings of the display unit.