Filter
Top Products
120 Barco - RHDM-2301 - User manual
Full functionality description
•
Measured standard:
the standard measured by the display unit on the input.
•
Identifier packet:
the packet with standard information identified by the display unit on the
input.
•
Use packet Identifier:
Here one can choose whether the packet identifier needs to be used for
signal detection or not. It can be unchecked in case the source gives a wrong identifier. This can
be the case when manufacturers do not use the correct standard.
To display the video information on the screen, the display unit gives priority to the standard it
detects by analyzing the input signal. If the identifier packet does not correspond to the measured
standard, or if the video signal is not displayed properly due to a wrong measurement of the
standard, it is possible to force the display unit to show the video signal according to manual
settings by checking the “Override signal detection” option.
•
Override signal detection:
When checked, the display unit will ignore the measured standard
and will display the video signal according to the manual settings.
•
Encoding:
sets the encoding of the video signal. This can be RGB or YCbCr.
•
Chroma sampling:
sets the sampling of the video signal. Possible sampling options are: 4:2:2,
4:4:4 and 4:4:4:4.
•
Bit depth:
sets the bit depth of the video signal. Possible settings are: 8, 10 or 12.
•
Video framing:
sets the video framing of the video signal: Possible options are: Interlaced, Pro-
gressive or Segmented.
automatic detection of the input signal
input signal is set manual: override signal detection is checked