Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 100 –
Configuration (continued)
6.2.19 Configuring modem connections
(Connections/modem menu)
In this dialog box you can determine the video systems to which—via the
modem—a two–way connection should be connected.
In order to ensure that a configuration can be performed, an RAS–capable
modem* must be connected and RAS service must be installed. If no
RAS–capable modem is connected or no RAS service is installed, the following
note symbol and a button with additional information appear.
Note: Function must be activated under Hardware/Connections.
No. Name Description
1 New
Creates a new connection to a remote modem
remote station.
Click on New and enter the actual name of the
remote station (the computer name) in the Name
input box.
2 Delete
Deletes the connection to a remote modem
remote station.
In the overview (in the lower portion of the dialog
box), select the remote station that you wish to
delete and click on Delete.
3 Number Enter the complete telephone number of the
remote station in the entry box Number . If your
own user station is connected to a PABX, you
must enter a digit (usually a “0”) before the
number of the remote station in order to obtain
the exchange line.
* See Section 4.16.1 for additional information.