Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 91 –
Configuration (continued)
6.2.14 Configuring relays
(Hardware/Frame grabber/Relays menu)
A maximum of 4 or 8 relay outputs can be connected to each MVTitan grabber
card. With the MVSigma grabber card, no relays can be connected. A maximum
of 2 MVTitan can be installed.
The relays can be activated locally using a remote station or via a browser.
No. Name Description
1 Input Click on the corresponding relay output. The
selected line is activated.
Please be aware that relay output 4 might already
be in use. This is the case when a fault indicator
has been selected in the Connections menu. In
this case, the system automatically uses relay
output 4 of the 1st MVTitan with the fault
indicator.
2 Type Click on the arrow pointing downwards in the
Type column and select whether the relay output
should be activated or not.
The relay output is activated.
The relay output is not activated.
3 Name Place the cursor in the Name column and enter
the name. Any name can be chosen.
4 Accept Click on Accept. If you have made incorrect
inputs, click on Reject and start over.