Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 108 –
Configuration (continued)
Configuring a backup job macro:
No. Name Description
1 New
Creates a new backup job macro.
Click on New and enter the name in the input box.
2 Delete
Deletes an existing backup job macro.
Select a backup job macro in the list box and click on
Delete. The backup job macro will be deleted.
3 Copy Copies an existing backup job macro.
Select a backup job macro in the list box and click on
Copy. The backup job macro is copied and can be
adapted quickly.
4 Backup
to execute
Select the search macro in the list. The result of this
search macro will then be saved upon activation of
the backup job macro.
5 Authorization level Select the authorization level for archive access
during backup from the list.
6 Selecting backup
drive
Select the drive. The data will be transferred to this
drive.
7 Accept Click on Accept. If you have made incorrect inputs,
click on Reject and start over.
Note: A time–controlled backup can only be linked to one alarm status. To
do this, select a detector input that is always in alarm. A time period
and a backup job macro have to be assigned to this detector input.
Note The use of a SIM detector is only recommended if the backup is to
be done manually. A SIM detector is not suitable for an automatic
time–controlled backup because the alarm status will not be
maintained if system is reset.