Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 66 –
Configuration (continued)
6.2.3 Configuration of hardware connections
(Hardware/connections menu)
You can set–up numerous hardware options in this dialog box. Select the hard-
ware either by clicking on the arrow pointing downwards and making the selec-
tion or by activating—clicking—the relevant control box in front of the hardware.
Click once more for deactivation.
Control box is activated. Hardware is selected.
Control box is not activated. Hardware is not selected.
The settings on this hardware page should not normally be changed unless
there are expansions. If changes are actually required, they can only be carried
out by authorized persons or after consultation with the technical support de-
partment.
No. Name Description
1 Framegrabber 1 MVTitan: The system contains one MVTitan
Grabber.
2 MVTitan: The system contains two MVTitan
Grabbers.
1 Sigma: The system contains one MVSigma
Grabber.
2 Video signal PAL or NTSC
3 IP cameras * A maximum of 16 network cameras can be con-
nected.
* See section 6.2.15 for additional information. Contact Bosch Security
for an IP camera compatibility list.