Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 89 –
Configuration (continued)
Saving camera positions
You can set the positions of dome cameras to which you can automatically
swivel time and time again. Users can quickly select these positions in the live
image, provided they are authorized to do this.
3 This is how you control
the camera. This is how you swivel the camera:
Move the mouse cursor into the camera image
until the direction arrow points in the direction in
which you want to swivel the camera. Then press
the left mouse button. The camera swivels in the
direction of the arrow with the speed increasing
the further you move the arrow outwards (with the
mouse button held down).
This is how you zoom:
Move the mouse cursor into the center of the
camera image until the magnifying glass appears
with a plus or minus sign. You can zoom the
camera by clicking the left mouse button.
The camera moves closer to the object.
The camera moves away from the object.
4 Camera settings Implement the following settings.
Focus Sharpness of the image and
Aperture Brightness
5 Positions saved
ID Name Click on the arrow pointing downwards in the ID
name text box and select a number that has not
been used if you want to save a position or select a
previously saved position if you want to change it.
Note:
A previously saved camera position can be
displayed by selecting it in the ID Name text
box and clicking on Display .
The saved position is deleted via Delete .
Save Click on Save , enter a logical name in the open
dialog box, and confirm it. A message appears
that the scene has been saved. The name is
imported into the ID Nametext box. When this
name is selected, the camera automatically
moves to this camera position.