Filter
Top Products
Installation Manual for DiBos Video System
A5/11–2004610–4.998.137.176 – 73 –
Configuration (continued)
6.2.7 Configuration of barcode reader (option)
(Hardware/barcode reader menu)
You can connect a barcode reader (must be activated under Hardware/Con-
nections). The barcode reader supports the output of a scanner. This input,
which is supported by the video system, needs to be configured as a detector.
No
.
Name Description
1 Input Click the input of the barcode reader. The line is
activated.
2 Type Click on the arrow pointing downwards in the
Type column and select whether the barcode
reader should be activated or not.
A barcode reader will be connected to the input.
No barcode reader will be connected to the input.
3 Name Place the cursor in the Name column and enter
the name. Any name can be chosen. The input is
now known to the system under this name.
4 relevant places
from – Enter the position of the barcode number here
from where the barcode reader is to begin
checking (counting starts from the left).
Number – Enter the number of places to be checked.
5 Accept Click on Accept. If you have made incorrect in-
puts, click on Reject and start over.